Roof waterproofing in Cape Town
A leaking roof is rarely the whole roof. We find the failed flashing, cracked ridge or blocked valley, fix it properly, and coat the roof where it needs it.
Water that drips into a ceiling has usually travelled. It runs down the underside of sheeting, along a batten or across a tile before it finds a way through, so the stain is often far from the cause. Before we quote, we get onto the roof and find the actual entry point.
Where roofs usually leak
- Flashings around chimneys, walls, skylights and solar mounts that have lifted, cracked or rusted
- Ridges and hips where the mortar has cracked and let water under the capping
- Valleys that block with leaves and overflow under the tiles
- Laps and fixings on IBR and corrugated sheeting, where screws loosen and washers perish
- Cracked or slipped tiles, often after someone has walked on the roof
- Parapets and box gutters on flat and mono-pitch roofs (see box gutter waterproofing)
How we waterproof a roof
Tiled and slate roofs
We replace cracked tiles, re-bed or seal ridges and hips, clear and seal valleys, and waterproof flashings with a reinforced liquid membrane. Where the whole roof has aged, a waterproof roof coating can follow.
IBR and corrugated sheeting
We treat rust, replace perished fixings, seal laps and screw heads, and waterproof the details. A full coating then protects the sheeting and can refresh its colour. For large commercial roofs, our sister company Qualispray sprays roof coatings at scale.
Concrete and flat roofs
Flat roofs need a continuous membrane. See torch-on and flat roof waterproofing for how we choose between torch-on and liquid systems.
Preparation decides how long it lasts
Most failed roof waterproofing failed at the preparation stage, not the product. Before anything goes on, we clean the surface, remove loose and failed material, treat rust, repair cracks and prime. It is the least visible part of the job and the one we spend the most care on.
Related services
Questions
Why does my roof only leak in heavy rain?
Wind-driven rain gets pushed sideways and upwards into gaps that light rain never reaches: lifted flashings, cracked ridge mortar, laps in sheeting and overflowing valleys. That is typical in Cape Town’s north-westerly winter storms.
Do I need to waterproof the whole roof?
Not always. If the roof is sound and the leak comes from one detail, fixing that detail is the right answer. If the surface itself has aged, cracked or rusted, a full coating or membrane makes more sense. We tell you which after the assessment.
Can you waterproof a roof that has already been painted?
Often, yes, as long as the existing coating is well bonded. Loose and flaking material has to be removed first, or the new system fails with it.
Get a free assessment
Gavin or the team visits, finds the cause and sends an itemised quote.
Or call Gavin on 082 821 3275
Prefer to talk it through?